The
24 NTX is particularly suitable
for casting very small, high
precision components in multiple-cavity
dies, at high speeds. The 24
NTX machine is capable of reaching
a dry cycle speed of 4,500 cycles
per hour.
The 24 NTX
is also frequently used for
components that are too large
for the 22 NT, or that require
especially high surface finish
or density. The 24 NTX will
accept dies from Techmire Model
22 and other four-slide die-casting
machines. |
|
The 44 NTX
toggle mechanisms are mounted
on massive toggle brackets,
which are bolted to the platen
of the machine. On the opposite
side from the table, the four
toggle brackets are joined together
by a heavy ring. The resulting
assembly is extremely rigid.
Deflection under load is minimal.
The 44 NTX
machine is capable of reaching
a dry cycle speed of 3,600 cycles
per hour and accepts tooling
designed for Techmire 44NT and
44H series machines. |
|
The
88 NTX was developed for single
cavity production of large surface
area parts as well multiple
cavity production of smaller
components. It is the largest
die-casting machine manufactured
by Techmire. The 88 NTX machine
is capable of reaching a dry
cycle speed of 2,100 cycles
per hour.
The 88 NTX
is equipped with a quick
die change system, which
allow die changeover of a two
(2) slide mold in as little
as 15 minutes. |
|
